Hi,
Do anybody here use one of the latest RS releases with OpenSUSE 10.x? And if so, does it work? I can't get it to run here.
Thanks & regards,
Andreas
RS3D V5.x and OpenSUSE 10.0
Moderator: odubtaig
2 posts • Page 1 of 1
RE: RS3D V5.x and OpenSUSE 10.0
by odubtaig » Sunday 23. July 2006, 20:34
That depends on which version you're using. It works on 10.0, at least on my computer, but if you have XGL running on 10.1 I believe it breaks it.
If that's not the problem, make sure you have OpenMotif and the proper graphics drivers installed, failing that run it from a terminal (should just be realsoft3d) and see if it says anything there, I can't remember off the top of my head if there's a specific debug or verbose command and I'm not at my desk so I might have more to add.
If that's not the problem, make sure you have OpenMotif and the proper graphics drivers installed, failing that run it from a terminal (should just be realsoft3d) and see if it says anything there, I can't remember off the top of my head if there's a specific debug or verbose command and I'm not at my desk so I might have more to add.
-
odubtaig - Posts: 54
- Joined: Sunday 26. September 2004, 20:59
- Location: Sheffield England
2 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests